NOTICE:
The magnet shown in the picture is for illustration purposes only. The supplied magnet may also have a sharp edge. If you require strictly a magnet with a sharp or chamfered edge, please check availability.
SWALLOWING MAGNETS: Do not swallow or inhale magnets. The attraction of magnets located inside the body can cause serious injury and requires immediate medical attention. Keep out of reach of children. Magnets are not a toy.
RISK OF ACCIDENT: Magnets are very fragile. Colliding magnets may crack and sharp fragments can be thrown several meters away and injure eyes. Handle magnets carefully and attentively, prevent magnet collision. CAUTION: Neodymium magnets are very strong and can jump together even from a great distance. Keep magnets at a sufficient distance from each other and wear protective goggles when handling them. Also consider the safety of persons who are watching the manipulation with magnets.
RISK OF ACCIDENT: Large, especially neodymium magnets have extremely strong attractive force. Inattentive and unfocused handling may result in pinching fingers or skin between magnets. CAUTION: this can cause bruises and contusions. Very large, particularly neodymium magnets may even cause bone fractures. Wear thicker protective gloves when handling larger magnets.
NOTICE: The stated pull-off force values of some products were measured under ideal conditions defined by the test environment. However, these values may vary depending on the specific type of environment, where for example operating conditions and subsequent wear may influence the effectiveness of the product. Measurements were not carried out for all products and in such cases the values represent only an estimate or an internal auxiliary calculation of the seller. The stated values must therefore be considered as indicative and any deviations cannot be regarded as a defect within the meaning of Sections § 2095 and § 2161 (1)(a) of the Civil Code. To determine the exact pull-off force in a particular case, it is necessary to perform your own measurement. If the pull-off force values found by you are not sufficient, because they will not correspond to the stated values, you may use the guaranteed option to return goods within 30 days under the conditions specified here: https://e-shop.magsy.cz/personal-data-protection-terms/ and purchase a stronger magnet. The 30-day period serves for testing the goods; after this period the seller may refuse to accept the return.
Additional parameters
| Category: | Ferrite magnets cylinders - parallel to the axis |
|---|---|
| According to the shape: | Cylinders |
| Diameter A (mm): | 16 |
| Height B (mm): | 5 |
| Magnetic characteristics: | MF8T |
| Marking: | FMI-A (16x5) |
| Tearing force: | 0.19 |
| Tearing force (N): | 1.9 |
| Temperature resistance: | 200 °C |
| Tolerance (± %): | 2 |
| Type: | weaker isotropic |
| Weight (g): | 4.5 |
Be the first who will post an article to this item!