Stainless flat steel (strips) 30 x 10 mm, rolled, length 1 m - 1.4301
Flat stainless steel rod (stainless steel strips, flat pieces) is manufactured using common stainless austenitic steel (so called food industry stainless steel) containing 18 % of chromium (Cr) and 10 % of nickel (Ni). Chemical composition meets the standard treating a utilization of products for food industry and drinking water. Maximum temperature is 450 °C. This alloyed, noble steel is characterized by a good resistance against corrosion in the water and air mediums, without a concentration of chlorides and/or inorganic acids and salts. Surface corrosion resistance may be increased by polishing. Stainless steel 1.4301 is workable and possible to be welded to a great extent.
This stainless steel type has the following parameters:
- It is possible to be welded (in the weld area it tends to an inter-crystalline corrosion).
- Splinter-workable quite well.
- Possible to be polished.
- Alloying Cr 17 – 19.5 %, Ni 8 – 10.5 %, C < 0.07 %.
- Tensile strength Rm 520 - 720 N/mm2.
- Yield strength Rp 0.2 min. 210 N/mm2.
Additional parameters
| Category: | Strip steel |
|---|---|
| EAN: | 8595133929691 |
| Length (m): | 1 |
| Material: | stainless steel DIN 1.4301 /AISI 304 / ČSN 1724 0 |
| Surface treatment: | By pickling |
| Thickness (mm): | 10 |
| Weight (kg): | 2.32 |
| Width (mm): | 30 |
Discussion
Be the first who will post an article to this item!